Previous
Next
BMIT Power Board
Salient Features of the Power Board
-
Power Board for BMIT Zynq SoM and BMIT Carrier Board
-
Adaptor Power DC Input Range +9V to +36V (TYP: +24Vdc)
-
GPIOs on Adaptor circular connector
-
PoE Power Input Range +37V to +57V (TYP: +48Vdc)
Overview
Features
Specifications
Description
The BMIT Power board provides consistent +5V or +3.3V input to the BMIT Zynq SoM and carrier board respectively for stable operation. The board has been designed to provide a consistent output voltage irrespective of the fluctuations on the input side. The power board takes power from either a PoE interface or an M12 circular adaptor connector.
The PoE connector takes +37V to +57V (TYP: +48Vdc) as input and generates its outpur voltage through the PoE circuitry.
For the M12, the corresponding voltage range is +9V to +36V (TYP:+24Vdc) and an isolated DC-DC onboard converter generates the output voltage.
* The custom power adapter is available separately for purchase along with the power board.
Features
-
Stable power for BMIT Zynq to protect it from power surge damage
-
Dual power-input with Power ORing
-
Isolated GPIOs present on the M12 adaptor connector
-
RJ45 port for PoE
-
Powers both, the SoM as well as the Carrier Board
Detailed Specifications
On Module
Connector Interfaces
General
On Module
Power Input:
-
Adaptor Input: +24V @ 600mA using custom power adaptor
-
PoE Input: +48V @ 400mA, supports classification up to 802.3bt
-
RJ45 Connector – PoE input & Ethernet data
-
M12 Circular Adaptor Connector - GPIO and Adaptor Power Input
-
Power stacking connector interfacing with BMIT carrier board
Dimensions (W x D x H):
-
77mm x 69mm x 22.5mm
Power Input:
-
Adaptor Input: +24V @ 600mA using custom power adaptor
-
PoE Input: +48V @ 400mA, supports classification up to 802.3bt
Connector Interfaces
-
RJ45 Connector – PoE input & Ethernet data
-
M12 Circular Adaptor Connector - GPIO and Adaptor Power Input
-
Power stacking connector interfacing with BMIT carrier board
General
Dimensions (W x D x H):
-
77mm x 69mm x 22.5mm
Featured Products
- One 10/100/1000 Mb/s Ethernet Port
- 1 x MIPI Sensor Interface
- 1 x SD Card 2.0 Interface
- 1 x USB 3.0/ USB 2.0 Interface
- Onboard power distribution circuit for IO peripherals
- Stacks BMIT power board as well as SOM
- SD card interface for booting available
- For use with BMIT Carrier Board
- Stackable design to add more boards
- Features 8-axis stepper motor driver
- Carrier Board for NVIDIA Jetson Nano, Jetson TX2 NX and Xavier NX
- GigE ports with PoE output
- DC input power 5V
- Daughter board for the BMIT carrier board
- Features a 4-axis Stepper motor driver
- DC input power 24V with EMI/EMC filter for industrial application
- Daughter board compatible with BMIT carrier board
- GigE ports with PoE output
- DC input power 24V with EMI/EMC filter for industrial application
Previous
Next
