Previous
Next
BMIT Zynq SOM - Xilinx Zynq XC7Z020 FPGA
Salient Features of the SOM Board
-
Xilinx’s Zynq 7000 SoC with CLG400 Package
-
8Gb DDR3 & 32Gb eMMC
-
Up to 100 FPGA IOs
-
240pin 2x Samtec Edge Connector
-
Low Power Consumption rating @ 7W
Overview
Features
Specifications
Description
The BMIT Zynq SOM is developed by Bit Mapper using XC7Z020 Zynq FPGA. The form factor is the same for the Xilinx k26 SOM and BMIT Zynq SOM. The SOM can be mounted to the Carrier board for vision applications, which features camera support through a MIPI interface port.
Features
-
Robust ZYNQ FPGA for unhindered performance
-
Shares form factor with Xilinx K26
-
Stackable with carrier boards for added computational power and peripheral applications
-
Easy ethernet and USB connectivity
-
Compatible with Linux as well as Android Operating Systems
-
Vison Interface Compatible - via MIPI Interface Port
Detailed Specifications
On Module
Connector Interfaces
General
-
Xilinx 7000 Series SoC FPGA – XC7Z020-1CLG400C, Single/Dual ARM Cortex-A9 @ 866MHz
-
DDR3 SDRAM on PS – 8Gb,
Data width: 32bit
-
QSPI boot Flash on PS - 32MB,
Data width: 4bit
-
eMMC Flash on PS – 32Gb,
Data width: 8bit
-
2 x Power Good RGB LEDs (Red),
LED FPGA "Done" (Green)
-
1 x Switch (Reset)
From PS Block:
-
Gigabit Ethernet x 1
-
USB2.0 - host mode x 1
-
Debug UART x 1
-
JTAG
-
SD Card2.0 (4bit)
From PL Block:
-
50 LVDS/100 Single Ended FPGA IOs (2 banks)
-
Up to 8 Clock Capable LVDS/ Single Ended pins
-
Operating Voltage: +5V
-
Power Consumption: 7W
-
Operating Temperature: -40°C to +85°C
-
RoHS Compatible: Yes
Physical Dimensions (in mm):
-
77W x 60D
On Module
-
Xilinx 7000 Series SoC FPGA – XC7Z020-1CLG400C, Single/Dual ARM Cortex-A9 @ 866MHz
-
DDR3 SDRAM on PS – 8Gb,
Data width: 32bit
-
QSPI boot Flash on PS - 32MB,
Data width: 4bit
-
eMMC Flash on PS – 32Gb,
Data width: 8bit
-
2 x Power Good RGB LEDs (Red),
LED FPGA "Done" (Green)
-
1 x Switch (Reset)
Connector Interfaces
From PS Block:
-
Gigabit Ethernet x 1
-
USB2.0 - host mode x 1
-
Debug UART x 1
-
JTAG
-
SD Card2.0 (4bit)
From PL Block:
-
50 LVDS/100 Single Ended FPGA IOs (2 banks)
-
Up to 8 Clock Capable LVDS/ Single Ended pins
General
-
Operating Voltage: +5V
-
Power Consumption: 7W
-
Operating Temperature: -40°C to +85°C
-
RoHS Compatible: Yes
Physical Dimensions (in mm):
-
77W x 60D
Featured Products
- Onboard power distribution circuit for IO peripherals
- Stacks BMIT power board as well as SOM
- SD card interface for booting available
- For BMIT Zynq SoM and Carrier Board
- Dual power-input
- RJ45 port for PoE
- M12 adaptor connector
- For use with BMIT Carrier Board
- Stackable design to add more boards
- Features 8-axis stepper motor driver
- Carrier Board for NVIDIA Jetson Nano, Jetson TX2 NX and Xavier NX
- GigE ports with PoE output
- DC input power 5V
- Daughter board for the BMIT carrier board
- Features a 4-axis Stepper motor driver
- DC input power 24V with EMI/EMC filter for industrial application
- Daughter board compatible with BMIT carrier board
- GigE ports with PoE output
- DC input power 24V with EMI/EMC filter for industrial application
Previous
Next
