The Phoenix Group® Homepage
35 x 37 mm Bit Mapper i.MX 8M Mini Rugged SOM
Previous
Next
35 x 37 mm Bit Mapper i.MX 8M Mini Rugged SOM
Salient Features of the rugged SOM
- Enables building miniaturized rugged modules using NXP® i.MX 8M Mini
- Features a Quad-ARM A53 Core @1.6GHz
- Cortex M4 400MHz processor for general purpose low-power processing
- Samtec Connector with a minimum stacking height of 3.4mm
- Yocto-based Linux Operating System
-
Enables building miniaturized rugged modules using NXP® i.MX 8M Mini
-
Features a Quad-ARM A53 Core @1.6GHz
-
Cortex M4 400MHz processor for general purpose low-power processing
-
Samtec Connector with a minimum stacking height of 3.4mm
-
Yocto-based Linux Operating System
Overview
Features
Specifications
Description
The BMIT i.MX 8M Mini Rugged SOM is built based upon the NXP® i.MX 8M Mini to provide miniaturized modules. The SOM is designed such that all the modules are pin-compatible for scalability. The SOM works with custom carrier boards or with supported BMIT Carrier boards with ready compatibility. It also supports CSI and DSI interfaces. Rugged design of the SOM comes in handy when building applications in tough places.
Features
- SOM built upon NXP® i.MX 8M Mini SoC
- Low-power processing & small form factor
- Compatible with custom carrier boards / BMIT Carrier Boards
-
SOM built upon NXP® i.MX 8M Mini SoC
-
Low-power processing & small form factor
-
Compatible with custom carrier boards / BMIT Carrier Boards
- 1 GB Ethernet and USB interface
- Compatible with Linux operating system
- CSI and DSI interface
-
1 GB Ethernet and USB interface
-
Compatible with Linux operating system
-
CSI and DSI interface
Detailed Specifications
On Module
Connector Interfaces
General
On Module
Onboard Processing Module:
-
NXP® i.MX 8M Mini, Quad Arm Cortex A53 core @ 1.6GHz
General purpose Processor:
-
Cortex-M4 @ 400 MHz (for low-power processing)
Onboard memory:
-
1x 32GB LPDDR4
Primary Interfaces:
-
Gigabit Ethernet (IEEE1588, EEE, and AVB)
-
3x UART
-
4x I2C
-
2x SD 2.0 (for SD card and eMMC)
-
GPIOs
Multimedia Interfaces:
-
4-lane MIPI-CSI Interface
-
4-lane MIPI-DSI Interface
-
Operating Voltage: +5V with On-board high-efficiency PMIC
-
Power Consumption: 3W
-
Operating Temperature: -40°C to +85°C
-
Physical Dimensions: 35mm x 37mm
Onboard Processing Module:
- NXP® i.MX 8M Mini, Quad Arm Cortex A53 core @ 1.6GHz
-
NXP® i.MX 8M Mini, Quad Arm Cortex A53 core @ 1.6GHz
General purpose Processor:
- Cortex-M4 @ 400 MHz (for low-power processing)
-
Cortex-M4 @ 400 MHz (for low-power processing)
Onboard memory:
- 1x 32GB LPDDR4
-
1x 32GB LPDDR4
Connector Interfaces
Primary Interfaces:
- Gigabit Ethernet (IEEE1588, EEE, and AVB)
- 3x UART
- 4x I2C
- 2x SD 2.0 (for SD card and eMMC)
- GPIOs
-
Gigabit Ethernet (IEEE1588, EEE, and AVB)
-
3x UART
-
4x I2C
-
2x SD 2.0 (for SD card and eMMC)
-
GPIOs
Multimedia Interfaces:
- 4-lane MIPI-CSI Interface
- 4-lane MIPI-DSI Interface
-
4-lane MIPI-CSI Interface
-
4-lane MIPI-DSI Interface
General
- Operating Voltage: +5V with On-board high-efficiency PMIC
- Power Consumption: 3W
- Operating Temperature: -40°C to +85°C
- Physical Dimensions: 35mm x 37mm
-
Operating Voltage: +5V with On-board high-efficiency PMIC
-
Power Consumption: 3W
-
Operating Temperature: -40°C to +85°C
-
Physical Dimensions: 35mm x 37mm
Featured Products
- One 10/100/1000 Mb/s Ethernet Port
- 1 x MIPI Sensor Interface
- 1 x SD Card 2.0 Interface
- 1 x USB 3.0/ USB 2.0 Interface
- Onboard power distribution circuit for IO peripherals
- Stacks BMIT power board as well as SOM
- SD card interface for booting available
- For BMIT Zynq SoM and Carrier Board
- Dual power-input
- RJ45 port for PoE
- M12 adaptor connector
- Carrier Board for NVIDIA Jetson Nano, Jetson TX2 NX and Xavier NX
- GigE ports with PoE output
- DC input power 5V
- Daughter board for the BMIT carrier board
- Features a 4-axis Stepper motor driver
- DC input power 24V with EMI/EMC filter for industrial application
- Daughter board compatible with BMIT carrier board
- GigE ports with PoE output
- DC input power 24V with EMI/EMC filter for industrial application
- Enables building miniaturized rugged modules using NXP® i.MX 8M Mini
- Hirose Small Form Factor Connector
- Yocto-based Linux Operating System
- Low-power Processing Capability
Previous
Next
