The Phoenix Group® Homepage
40 x 40mm Bit Mapper i.MX 8M Mini SOM
Previous
Next
40 x 40mm Bit Mapper i.MX 8M Mini SOM
Salient Features of the SOM
- Enables building miniaturized rugged modules using NXP® i.MX 8M Mini
- Hirose Small Form Factor Connector
- Yocto-based Linux Operating System
- Low-power Processing Capability
-
Enables building miniaturized rugged modules using NXP® i.MX 8M Mini
-
Hirose Small Form Factor Connector
-
Yocto-based Linux Operating System
-
Low-power Processing Capability
Overview
Features
Specifications
Description
The BMIT i.MX 8M MINI SOM is built based upon the NXP® i.MX 8M Mini to provide miniaturized modules. The system design is such that the modules are pin-compatible to build scalable applications.
The SOM is compatible with custom carriers or compatible Bit Mapper carrier boards. It also supports CSI and DSI interfaces.
Features
- SOM built upon NXP® i.MX 8M Mini SoC
- Low-power processing capability
- Hirose small form factor
- Compatible with custom carrier boards / BMIT carrier boards
-
SOM built upon NXP® i.MX 8M Mini SoC
-
Low-power processing capability
-
Hirose small form factor
-
Compatible with custom carrier boards / BMIT carrier boards
- 1 GB Ethernet and USB interface
- Compatible with Linux operating system
- CSI and DSI interface
-
1 GB Ethernet and USB interface
-
Compatible with Linux operating system
-
CSI and DSI interface
Detailed Specifications
On Module
Connector Interfaces
General
On Module
Onboard Processing Module:
-
NXP® i.MX 8M Mini, Quad Arm Cortex A53 Core @ 1.6GHz
General purpose Processor:
-
Cortex-M4 @ 400 MHz (for low-power processing)
Onboard memory:
-
1x 32GB LPDDR4
-
1x 32GB eMMC 5.1 Flash
Primary Interfaces:
-
Gigabit Ethernet (IEEE1588, EEE, and AVB)
-
2x USB 2.0 OTG and PHY
-
1x PCIe 2.0 (1-lane)
-
4x UART
-
4x I2C
-
2x ECSPI
Multimedia Interfaces:
-
4-lane MIPI-CSI Interface
-
4-lane MIPI-DSI Interface
-
Operating Voltage: +5V with On-board high-efficiency PMIC
-
Power Consumption: 3W
-
Operating Temperature: -40°C to +85°C
-
Physical Dimensions: 40mm x 40mm
Mode Select-Ability Switch:
-
eMMC mode
-
SD card mode
Onboard Processing Module:
- NXP® i.MX 8M Mini, Quad Arm Cortex A53 Core @ 1.6GHz
-
NXP® i.MX 8M Mini, Quad Arm Cortex A53 Core @ 1.6GHz
General purpose Processor:
- Cortex-M4 @ 400 MHz (for low-power processing)
-
Cortex-M4 @ 400 MHz (for low-power processing)
Onboard memory:
- 1x 32GB LPDDR4
- 1x 32GB eMMC 5.1 Flash
-
1x 32GB LPDDR4
-
1x 32GB eMMC 5.1 Flash
Connector Interfaces
Primary Interfaces:
- Gigabit Ethernet (IEEE1588, EEE, and AVB)
- 2x USB 2.0 OTG and PHY
- 1x PCIe 2.0 (1-lane)
- 4x UART
- 4x I2C
- 2x ECSPI
-
Gigabit Ethernet (IEEE1588, EEE, and AVB)
-
2x USB 2.0 OTG and PHY
-
1x PCIe 2.0 (1-lane)
-
4x UART
-
4x I2C
-
2x ECSPI
Multimedia Interfaces:
- 4-lane MIPI-CSI Interface
- 4-lane MIPI-DSI Interface
-
4-lane MIPI-CSI Interface
-
4-lane MIPI-DSI Interface
General
- Operating Voltage: +5V with On-board high-efficiency PMIC
- Power Consumption: 3W
- Operating Temperature: -40°C to +85°C
- Physical Dimensions: 40mm x 40mm
-
Operating Voltage: +5V with On-board high-efficiency PMIC
-
Power Consumption: 3W
-
Operating Temperature: -40°C to +85°C
-
Physical Dimensions: 40mm x 40mm
Mode Select-Ability Switch:
- eMMC mode
- SD card mode
-
eMMC mode
-
SD card mode
Featured Products
- One 10/100/1000 Mb/s Ethernet Port
- 1 x MIPI Sensor Interface
- 1 x SD Card 2.0 Interface
- 1 x USB 3.0/ USB 2.0 Interface
- Onboard power distribution circuit for IO peripherals
- Stacks BMIT power board as well as SOM
- SD card interface for booting available
- For BMIT Zynq SoM and Carrier Board
- Dual power-input
- RJ45 port for PoE
- M12 adaptor connector
- Carrier Board for NVIDIA Jetson Nano, Jetson TX2 NX and Xavier NX
- GigE ports with PoE output
- DC input power 5V
- Daughter board for the BMIT carrier board
- Features a 4-axis Stepper motor driver
- DC input power 24V with EMI/EMC filter for industrial application
- Daughter board compatible with BMIT carrier board
- GigE ports with PoE output
- DC input power 24V with EMI/EMC filter for industrial application
- Enables building miniaturized rugged modules using NXP® i.MX 8M Mini
- Features a Quad-ARM A53 Core @1.6GHz
- Cortex M4 400MHz processor for general purpose low-power processing
- Samtec Connector with a minimum stacking height of 3.4mm
Previous
Next
Featured Products
- One 10/100/1000 Mb/s Ethernet Port
- 1 x MIPI Sensor Interface
- 1 x SD Card 2.0 Interface
- 1 x USB 3.0/ USB 2.0 Interface
- Onboard power distribution circuit for IO peripherals
- Stacks BMIT power board as well as SOM
- SD card interface for booting available
- For BMIT Zynq SoM and Carrier Board
- Dual power-input
- RJ45 port for PoE
- M12 adaptor connector
- Carrier Board for NVIDIA Jetson Nano, Jetson TX2 NX and Xavier NX
- GigE ports with PoE output
- DC input power 5V
- Daughter board for the BMIT carrier board
- Features a 4-axis Stepper motor driver
- DC input power 24V with EMI/EMC filter for industrial application
- Daughter board compatible with BMIT carrier board
- GigE ports with PoE output
- DC input power 24V with EMI/EMC filter for industrial application
- Enables building miniaturized rugged modules using NXP® i.MX 8M Mini
- Features a Quad-ARM A53 Core @1.6GHz
- Cortex M4 400MHz processor for general purpose low-power processing
- Samtec Connector with a minimum stacking height of 3.4mm
Previous
Next
BMIT Daughterboard with 8-axis Motor Driver
Salient Features of the Carrier Board
-
Daughter board compatible with BMIT carrier board for NVIDIA Jetson series
-
Features a 8-axis Stepper motor driver
-
DC input power 24V with EMI/EMC filter for industrial application
-
Useful in building industrial robotic solutions
Overview
Features
Specifications
Description
This BMIT daughterboard with 8-axis motor driver add robotic application ability to an existing NVIDIA Jetson SOM and BMIT Carrier Board setup. The board is equipped with multiple interfaces to add more I/O options. The special feature of this daughterboard is the 8-axis stepper motor driver which enables seamless robotic application development. Additionally, The daughter board also provides mulitple industrial digital input and digital output capablities for integration with other systems.
Note: This product requires and BMIT carrier board to be present – cannot function as an independent carrier board.
Features
-
Adds input-output capability to existing SOM setup
-
Wide range of interfaces and I/O options
-
Supports a very wide range of applications
-
Stackable design for added comptational power
-
Designed to work with Jetson Nano, Jetson TX2 NX and Xavier NX SOMs
Detailed Specifications
On Module
Connector Interfaces
General
On Module
Power Input:
-
+24V to board with On-board high-efficiency DC-DC converters for all voltages required on the board
-
1 x RS432 / RS422 / RS485 (BIOS switchable)
-
8 x stepper motor driver (up to 7A)
-
7 x digital input
-
10 x digital output
-
3 x AC relay output
-
15 x GPIOs (3.3 V)
-
24 V DC input
-
EMI/EMC filter
Dimensions (W x D):
-
200 mm x 145 mm
Power Input:
-
+24V to board with On-board high-efficiency DC-DC converters for all voltages required on the board
Connector Interfaces
-
1 x RS432 / RS422 / RS485 (BIOS switchable)
-
8 x stepper motor driver (up to 7A)
-
7 x digital input
-
10 x digital output
-
3 x AC relay output
-
15 x GPIOs (3.3 V)
-
24 V DC input
-
EMI/EMC filter
General
Dimensions (W x D):
-
200 mm x 145 mm
Featured Products
Previous
Next
Cannot Find What You’re Looking For?
Previous
Next